基于加速度计的坐标系匹配方法研究

为了提高加速度计应用中坐标系的匹配精度,提出了基于加速度计的坐标系匹配方法,介绍了其基本原理,并对加速度计的测角方法进行了深入研究.试验结果表明:该方法测量最大误差≤0.3°,满足实际应用要求,有效地解决了加速度计应用中的坐标系匹配问题.     

BaTiO3基Au纳米颗粒复合薄膜的制备及其光学性质研究

采用溶胶-凝胶（sol-gel）方法，成功的将高体积面分比的Au纳米颗粒复合到BaTiO3的非晶薄膜中，并对其光学性质进行了研究。用XRD、TEM、椭偏仪、吸收光谱、光克尔效应OKE（Optical Kerr Effcet）方法对薄膜进行了表征和测试。从吸收光谱观察到表面等离子体共振SPR（Surface Plasma Resonance)峰随热处理温度升高而红移的现象。光学非线性测试表明薄膜具有高的三阶非线性极化率Χ^(3)和超快的响应时间。     

基于积分原理的低功耗超声波流量检测方法

文章通过对时差式超声波流量检测方法的分析，提出了基于过零检测技术及积分法的信号处理方法，避免了繁琐的信号处理，降低了整机功耗。结合工作时序的设计，提出了实现低功耗超声波液体流量检测的措施。     

分光光度计法岩石阳离子交换容量测量方法及误差分析

系统介绍了分光光度计法岩石阳离子交换容量的测量原理和步骤,修正了行业标准SY5395-91中的计算公式.对测量过程中的误差进行了分析,尤其是标准工作曲线斜率误差和溶液浓度误差对吸光度的影响,给出了通过调整待测液浓度来降低测量误差的方法.最后计算出阳离子交换容量的测量不确定度.     

连续波腔衰荡技术原理推导及实验研究

基于无源腔的Q值定义,根据能量守恒原理,对连续波腔衰荡技术测量原理进行了推导,并基于多光束干涉理论,就入射光关断时间对腔出射光强信号衰荡线形及测量结果的影响进行了数值模拟和分析,分析表明：入射光的关断时间很大程度上决定着腔出射光功率信号的衰减线形,如果要消除入射光关断时间对测量结果的影响,入射光关断必须小于腔衰荡时间的1%。根据理论分析要求建立了一套测量系统,并对腔损耗约为50ppm的低损无源腔进行了实际测量,实验结果的分析显示,该测量系统测量误差约为0．15ppm。     

以一种新的距离度量作为反馈的相关跟踪方法

基于相关的模板匹配方法在图像跟踪中得到了广泛的应用,但是这种方法的主要缺点是对图像噪声非常敏感,而且由这种方法得出的相关曲面比较平坦。为了有效抑制噪声和局部遮挡对图像的影响,提出用鲁棒统计中的一个值代替相关值作为距离度量。它不是计算两幅图像的对应像素差值,而是计算两幅图像中差别不大的对应像素对的个数。实验证明这样得到的曲面相对　　收稿日期:2003 08 31;　修订日期:2003 10 28作者简介:张桂林(1944 ),男,天津人,教授,博士生导师,主要研究方向为自动识别、人体生物统计特征识别、图像处理算法与系统性能评估等。　　　　　　　要尖锐得多。当上述的距离度量应用于跟踪过程中时,模板的合理更新对跟踪非常重要。基于上述的距离度量方法,提出了一种新的模板更新策略。利用两幅图像中近似像素在整修匹配模板像素中所占的比例大小决定加权系数。这种加权策略可以自适应地根据图像序列的变化选择更新相关模板,同时在一定程度上减小模板漂移的危险。     

Simultaneous Measurement of Viscosity and Density with an Oscillating-Disk Instrument: The Effect of Fixed Plates

The period and damping of the free motion of a body oscillating in a fluid depend on the fluid's viscosity and density. Commonly, a working equation which expresses the damping as a function of the viscosity and density is solved for the viscosity, the damping being measured and the density being treated as an independently supplied parameter. Another working equation exists for the period, and, in general, the period depends on a combination of the viscosity and the density which is linearly independent of the combination that appears in the damping equation. It is, therefore, in principle, possible to determine both the viscosity and the density by a simultaneous solution of the two coupled working equations, since the period also is measured. In this paper, the working equations that describe the oscillating-disk viscometer are reviewed and their simultaneous solution is considered. The effect of fixed plates symmetrically located above and below the oscillating disk is of specific interest. The paper's main result is that fixed plates can dramatically increase the independence of the damping and period working equations, so that it becomes indeed feasible to determine the viscosity and the density of a fluid simultaneously from the damping and period of oscillating motion. A price is paid, however, because the instrument's working equations when plates are present have multiple solutions. Under special conditions, these multiple solutions can coalesce, and then one can only deduce the viscosity from the damping equation if the density is known a priori.     

大坝监测自动化中的人工比测研究

阐述了人工比测的概念、方式和数据分析方法,对人工比测及数据分析中应注意的问题也进行了深入研究。     

Improving the Calibration of Vacuum Gas Flow – Control Leak Gauges

A new and original method of calibrating helium leaks that makes it possible to take into account the existence of a number of auxiliary phenomena is described. For this purpose, a hollow leak the purpose of which is to reproduce only desorbed gas flows, is introduced into the vacuum system of the calibration bench. Analysis of the results of corresponding cumulation measurements makes it possible to introduce corrections for these phenomena.     

Measurement and Identification of the Parameters of SPICE-Models of a Bipolar Transistor

A method of measuring and identifying the static parameters of a bipolar transistor is considered. The characteristic of the transistor, from which the parameters of the model are determined, is chosen depending on what group the calculated parameters belong to. The characteristics are measured in such a way that the equations of the model describing them can be reduced to the simplest form.